Skip to content

Ski waxing for beginners

Ski waxing for beginners

That’s why training with skin ski waxes is so easy: it’s easy to get a good glide without your own waxing booth. Here are all the answers that make it easier for you to enjoy your next ski trip with super skis.

Let’s start with the basics. In cross-country skiing you have two styles: Classic, which requires grip under the skis, and skating, which only requires gliding.

Classic skiing = skin skis or wax skis

You want to have a good grip when skiing classically. Grip wax is applied to the middle of the ski, i.e., the area under the binding. This is called a grip zone. On the front and rear areas of the ski, you want to have good glide.

How do you find the grip zone? The retailer that sold you the skis should have marked the grip zone for you.

For cross-country skiing using the classic technique, either skin skis or wax skis are used.

Skin skis also need glide wax

It has become popular to use skin skis. Skin skis give you good grip without needing an application of grip wax or klister. You still need to make sure you have a good glide.

The easiest way to improve the glide is to use a liquid glide wax.

To put it simply: All skis – whether skin, wax or skating – should have an application of glide wax.

How to take care of the skins

The skins must also be treated in order to get the best possible ski trip. We recommend that you do this to your skins at regular intervals:

  • Impregnation of skin skis Impregnation makes the skins less able to absorb water from the snow. When the skins absorb water, it can freeze. This will cause you to lose grip. Impregnation helps to counteract this.
  • Skin ski cleaning: Cleaning the skins is important to remove dirt and pollutants from the trail found stuck under the skis after use.

Wax skis need grip wax or klister

Use grip wax or klister to get a grip. You want a good grip to be able to execute the proper classic technique.

Remember to place grip wax and klister only within your grip zone.

Grip wax is selected according to the temperature and conditions on the day you go skiing. If it is cold, it may be enough to use Blue Extra, a type of grip wax

Kick wax for different temperatures

Correct use of klister

Klister is most often used when there is wet snow and temperatures above freezing. The klister has the same function as the skins on skin skis or grip wax on wax skis: to ensure that you have a grip when you use the classic technique.

Recommended klisters

Skating skis just have to glide

It is important to distinguish between the two styles we have in cross-country skiing: classic and skating.

You have now had an introduction to classic skiing, i.e., skis that need a grip. Skating skis, on the other hand, only need to be able to glide. In other words, you don't need any skins, grip wax or klister to use them.

Instead, it places greater demands on good gliding. On skating skis, the entire ski must glide – from tip to end.

Here too, a liquid glide wax is the easiest alternative, but we recommend applying some hard wax using an iron from time to time.

A bit of prepping is better than none

There are countless methods to get good skis. The professionals you watch on TV can, for example, have multilayered skis with glide wax, walk on powder or use klister under grip wax to get the effect of both.

In any case, our challenge is to make it as simple as possible. Using a liquid glider is much better than never gliding your skis and skin skis are even better if you occasionally remember to impregnate the skins.

Happy skiing.